From the free quote to the final rinse, patio cleaning for brick in Lanham, MD follows a simple process: inspect, protect, clean, rinse and check. On brick, the method we use is low-pressure wash.
Method and pressure
Cleaning solution: Soft wash for algae and mildew; a masonry-specific cleaner for efflorescence and mortar haze.
What to know about cleaning brick
Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit. Organic growth comes off with a soft wash; mineral deposits such as efflorescence need a masonry-safe cleaner instead of more pressure.
Avoid: Zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet.
How often: Every 2-3 years for most homes.
Is it time for patio cleaning for brick?
- Green or black growth between pavers or on shaded concrete
- Grease spots near the grill
- Stains from planters, leaves and furniture
- Weeds in the joints
- White chalky haze on pavers or stone
Where the grime comes from
- Shade and damp soil around the patio
- Cooking grease and food spills
- Rust from metal furniture and planters
- Efflorescence (salts) rising out of masonry
What you can do yourself
- Move planters now and then so they don't leave rings
- Clean grill grease quickly with dish soap and hot water
- Pull weeds from joints before they spread
- Sweep often so leaves don't stain
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Blowing joint sand out of pavers
- Etching or pitting soft stone like travertine and sandstone
- Acid cleaners on limestone and travertine
- Stripping an existing sealer unevenly
How we handle patio cleaning for brick
- Check the patio material and any sealer
- Move furniture and protect nearby plants
- Pre-treat growth, grease and stains
- Clean with the right pressure and tools
- Rinse, re-sand joints if needed, and walk the patio with you
Typical patio cleaning for brick prices
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for brick
- Pressure Washing for Brick
- Soft Washing for Brick
- House Washing for Brick
- Driveway Cleaning for Brick
- Sidewalk & Walkway Cleaning for Brick
- Paver Cleaning & Sealing for Brick
- Rust Stain Removal for Brick
- Graffiti Removal for Brick
- Efflorescence Removal for Brick
- Exterior Mold & Mildew Removal for Brick
- Pre-Paint Washing for Brick
- Commercial Pressure Washing for Brick
- HOA & Apartment Pressure Washing for Brick
Local patio cleaning for brick for Lanham, MD
In Maryland, concrete has to deal with summer mildew and winter salt and freeze-thaw cycles. Annual cleaning and a sealer every few years help it last.
Crews serve all of Lanham (ZIP codes 20703 and 20706), plus Lanham-Seabrook (0.7 mi), Seabrook (0.9 mi), New Carrollton (0.9 mi) and Goddard (1.5 mi). Call (555) 010-0000 for a free quote in Lanham.
Patio Cleaning for Brick: frequently asked questions
How much does patio cleaning for brick cost in Lanham, MD?
Patio Cleaning for Brick typically costs $150-$400 for a typical backyard patio, and usually takes 1-2 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for patio cleaning for brick?
For brick: usually 500-1,500 PSI with a wide fan tip, held well back from the mortar. What we avoid: zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet. The cleaning solution does most of the work, followed by a gentle rinse.
Is patio cleaning for brick safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule patio cleaning for brick?
Every 2-3 years for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.